HTC 6435L (Droid DNA)

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:

 

  • Houdini Provisioning Instructions
    • This phone uses the MTC cable. Remove the plastic cover on the bottom of the phone to attach the cable.
    • If the phone is not dialing remove the battery and replace.
    • NOTE: Only 1X is guaranteed on the Page Plus network unless the phone is being activated as a New Activation. Update to Follow.
  • Pre-Provisioning
    • Note: Must have 4G LTE SIM Card
    • Dial ##3424 then press Call
    • Phone is now in DIAG Mode
  • Post Provisioning
    • You may have to enable CDMA ONLY mode if the device does not appear to make calls or get data connection after test call.

    • So with the DNA, it appears that the "CDMA Only" option is gone from the Mobile Network settings. Furthermore, access to the testing menu thru *#*#4636#*#* is gone.

    • However, you can still download the "Phone Info" app from the play store

      1) Run the "Phone Info" app.

      2) Select "Phone information"

      3) Change the Network Selection Mode by clicking on the Selection Box

      4) Change to CDMA Auto PRL

      5) Just hit your Home button to exit, you shouldn't even have to restart. Voila- You're in 3G CDMA Mode. Next:

      1. Test Call
      2. Data may take up to 15 Minutes to appear
  • Alternative Activation
    • If the device is not functioning properly after a flash has completed, attempt to active with the Decimal form of the MEID (ex. 256XXXXXXXXXXXXXXX) instead of the HEX "IMEI" (ex. 990000XXXXXXXX)
  • Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
    • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
    • SB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows XP,Vista.
    • Handset has not been added to the Houdini database.
    • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

 

 

Device and Programming Instructions:

 

  • Dial ##7764726 then press Call
  • Enter SPC 000000
  • Select NAM-General
  • Select Mobile Directory Number
  • Enter MDN (10 digit phone number) then press OK
  • Press Back
  • Select NAM CDMA Settings
  • Select MIN1
  • Enter MIN without area code (7 digit phone number) then press OK
  • Select MIN2
  • Enter only MIN area code (3 digit number) then press OK
  • Scroll down to Home SID/NID #1
  • Verify HomeSID is correct
  • Press Menu (top right) and select Commit Modifications
  • Phone will power cycle and programming is now complete

 

Reference Links:

 

Notes:

 

Cable: MTC

Symbol: Bear

Compatible Cellebrite Cable: 100

Cable Image:

6435L (Droid DNA)