HTC EVO 4G PC36100

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, MobileNation, Smart, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:


  • Houdini Provisioning Instructions
    • This phone uses the MTC cable. Remove the plastic cover on the bottom of the phone to attach the cable.
    • If the phone is not dialing remove the battery and replace.


  • Pre- Provisioning Instructions:
    • Open the Dialer Pad. Enter ##3424# then plug in the device.
    • Be sure 4G is disabled on the device after flash to prevent data issues. 


  • Additional Troubleshooting
    • If device is not showing up in device manager correctly or at all after DIAG is entered follow steps below:
    • Bring up the dial pad and enter ##3424#, press Menu, then select Disable.
    • Once complete, repeat the ##3424# on the keypad and handset should now show up properly in device manager.
    • Continue normally with the Houdini process.


  • Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
      • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
      • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows XP,Vista.
      • Handset has not been added to the Houdini database.
      • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.


Device and Programming Instructions:

  • Sprint manual programming:
    • After provisioning with Houdini, manually restart the phone (Remove and replace the battery)
    • Press the green talk symbol to get to the dial pad. Enter ##000000# or ## 468346#
    • Highlight the MDN and click Edit at the bottom left of the screen. Click "ok" when complete.
    • Highlight the MSID/MIN and click Edit at the bottom left of the screen. Click "ok" when complete.
    • Next click on the MSID field and hit edit. Enter the MIN/MSID and hit "ok'.
    • Tap "ok" at the top right of the screen. Click ok to update the items. Click ok the reset the device. (If no option for OK appears, hit "menu" and then "submit modifications")
    • Unplug the Device and the phone programming is complete.

If issues connecting with Youtube occurs after a data flash and data is functioning properly, please follow the steps below:

  • ##3282# > Advance > RTSP/HTTP Setting
  • Above method was tested changing All IP's to , and all Ports to 0

Reference Links:


Cable: MTC

Symbol: Bear

Compatible Cellebrite Cable: 100

Cable Image: 

EVO 4G PC36100