Samsung SPH-D700 Epic

Phone Pre-Setup
  • Menu > Settings > Applications > Development
    Enable USB Debugging
    Bring up the dial-pad on the phone
    Dial ##8778#
    Set UART and USB to Modem
    If the phone does not detect initially detect, while the phone is plugged in, redial ##8778#
    Set UART and USB back to PDA, then Exit to Home Screen
    Then Redial ##8778# and set both back to Modem
    If the phone still fails to detect, retry these settings again with USB debugging mode on.
    Be sure you have installed the drivers from the downloads section of the helpdesk
    Continue normally with Houdini process

DATA ISSUES:

  • Disable WiFi
  • Ensure 4G Data is Disabled
  • Ensure that the Sprint Connection Optimizer is Disabled
  • Ensure 3G Data is Enabled
  • Ensure Roaming is Enabled
  • Ensure Roaming Guard is Disabled
Programming
  • Power on the handset
    Enter ##000000# or ## 468346# and select Edit
    Press "Touch Here" to start editing information
    Enter MDN (10-digit phone number) and press enter on bottom right
    Enter MIN (10-digit phone number) and press enter on bottom right
    Select Done when finished
    Phone will powercycle and programming is now complete
Reference Links
USB Cable
  • MTC Bear
Tips and Tricks
  • YouTube Connection Issues
    • follow the steps below:
      Dial ##3282#
    • Select Edit
    • Enter SPC
    • Select Others
    • Select Multimedia
      Set all IP's to 0.0.0.0 and all Ports to 0
Video Tutorials
  • Coming soon